Additional Features - GE r10965v-1 Owner's Manual

Refrigerator The refrigerator doors may feel different than
the ones you are used to. The special door
doors
opening/closing feature makes sure the doors
close all the way and are securely sealed.
When opening and closing the door you will
notice a stop position. If the door is opened
past this stop point, the door will remain open
to allow you to load and unload food more
easily. When the door is only partially open,
it will automatically close.
The resistance you feel at the stop position will
be reduced as the door is loaded with food.
Door If doors are uneven, adjust the refrigerator door.
alignment
1 Using a 7/16 socket wrench, turn the door
2 After one or two turns of the wrench, open
adjusting screw to the right to raise the door,
to the left to lower it. (A nylon plug, imbedded
in the threads of the pin, prevents the pin
from turning unless a wrench is used.)
and close the refrigerator door and check the
alignment at the top of the doors.

Additional Features

Stainless Steel Refrigerator
When the door is only partially open,
it will automatically close.
Beyond this stop the door will stay open.
To remove the base
grille, open the
doors, remove the
screw at each end
of the base grille
and then pull the
grille straight out.
7/16 Socket Wrench
Raise
15