Moving Machine By Hand - Husqvarna PZ 72 Owner's Manual

Moving Machine By Hand

IMPORTANT INFORMATION
Tighten the valve moderately.
Do not overtighten the valve when closing.
That can damage the valve seat.
Pump Release Valves
Pump release valves are located at the front and
rear of the pump. they are used to release the
system so the machine may be moved by hand
when not running. tilt the seat forward and remove
the fan cover to gain access to the pump.
Use a / " wrench or socket and ratchet. turn the
5
8
pump release valve ½ turn. Reverse the procedure
to reset the pump.
OPERATION
Remove fan cover to access release valves
WARNING!
No adjustments or maintenance
should be carried out unless:
• the engine stopped
• the ignition key removed
• the parking brake activated
8065-061
37