Motion Control Levers; Controls - Husqvarna PZ 72 Owner's Manual

Motion Control Levers

the machine's speed and direction are
continuously variable using the two steering
controls. the steering controls can be moved
forward or backward about a neutral position.
Furthermore, there is a neutral position, which is
locked if the steering controls are moved outward.
When both controls are in the neutral position (n),
the machine stands still.
By moving both controls an equal amount forward
or backward, the machine moves in a straight line
forward or backward respectively.
In order, for example, to turn right while moving
forward, move the right control towards the neutral
position. the rotation of the right wheel is reduced
and the machine turns to the right.
Zero turn can be achieved by moving one control
backward (behind the neutral position) and carefully
moving the other steering control forward from its
neutral position. the rotation direction when zero
turning is determined by which steering control
is moved backward behind the neutral position.
If the left steering control is pulled backward, the
machine turns to the left. Use extra care when using
this maneuver.

CONTROLS

Steering controls
1. Forward
2. neutral
3. neutral slot, neutral lock
4. Reverse
Motion control lever pattern (right side)
WARNING!
The machine can turn very rapidly
if one steering control is moved
much further forward than the
other.
8065-003
8065-053
19