Parking Brake; Parking Brake Adjustments - Husqvarna PZ 72 Owner's Manual

Parking Brake

Visually check that no damage is found on the lever,
links, or switch belonging to the parking brake.
Perform a standstill test and check that there is
sufficient braking action.
WARNING!
Faulty adjustment result in reduced
braking ability and can cause an
accident.
IMPORTANT INFORMATION
The machine must be standing still when
applying the parking brake.

Parking Brake Adjustments

1. Using a jack stand, raise the rear of the
mower up off the ground. Make sure the
machine is securely supported.
2. Remove the rear tire assemblies.
3. Release the park brake.
4. Measure the distance from the swivel to the
washer. (See Illustration). the measurement
should be 1¾" on both the right and left side
brake linkage assemblies.
42
MAINTENANCE
Parking brake
1. Swivel
2. Washer
Parking brake adjustment
1¾"
1
2
8065-006
8065-051