Table of Contents
Advertisement
Rollover Protection System (ROPS)
the ROPS increases the basic weight of the unit by
73 lbs/33 kg.
•
Do not use ROPS as a lifting, attaching or
anchoring point.
•
Do not use ROPS for wrecking or towing.
•
Do not exceed Max GVW: 2822 lbs/1283 kg.
•
Read machine's operator manual before each
use.
•
Securely fasten the seat belt if the unit has a
ROPS.
•
Where possible, avoid operating the unit near
ditches, embankments and holes.
•
Reduce speed when turning, crossing slopes
and on rough, slick or muddy surfaces.
•
Stay off slopes too steep for safe operation.
•
Watch where you are going, especially at row
ends, on roads and around trees.
•
Do not permit others to ride.
•
Operate the mower smoothly - no jerky turns,
starts or stops.
•
When mower is stopped, set brakes securely
and use park brake.
•
If any part of ROPS is damaged, the entire
ROPS must be replaced.
•
Check all bolts including seat belt for correct
torque before each use.
•
Check ROPS structure for damage before each
use.
•
ROPS bar is nOt intended for use in sub zero
temperatures.
Spark Arrestors
A spark arrester is standard equipment on the unit
and is attached to the engine muffler. Clean the
interior screen regularly, depending on usage and
conditions.
to clean, remove the clamp securing the tail pipe.
Remove the tail pipe and slide the spark arrestor
screen out of the muffler. Clean carbon from the
screen with a soft brush or cloth.
Replace screen and reattach the tail pipe, orienting
the tail pipe either horizontally or upwards, away
from grassy surfaces.
SAFETY
WARNING!
The rollover protection system's
capabilities may be impaired by
damage if the mower is overturned
or if alteration to the ROPS occurs.
If these conditions take place, the
total structure MUST be replaced.
Regularly clean spark arrestor screen
8011-514
17
Hide quick links:
Advertisement
Table of Contents
