Table of Contents
Advertisement
Section
10
Initial Settings
Activating the BT AUDIO source
You need to activate the BT AUDIO source in
order to use a Bluetooth audio player.
This setting is set to on by default. If you do
not use BT AUDIO, you can turn it off.
1
Display the initial setting menu.
Refer to Adjusting initial settings on page 42.
2
Use MULTI-CONTROL to select
BT AUDIO in the initial setting menu.
3
Press MULTI-CONTROL to turn the
BT AUDIO source on.
# To turn the BT AUDIO source off, press
MULTI-CONTROL again.
Saving the battery
consumption
Switching this function on enables you to save
the consumption of battery power.
! Operations other than turning on the
source are not allowed when this function
is on.
Important
! If the battery in your vehicle is disconnected,
the Power Save mode is canceled. Turn on
Power Save again once the battery has been
reconnected. If the ignition switch in your ve-
hicle doesn't have an ACC (accessory) posi-
tion, it is possible depending on the
connection method that when Power Save is
off, the unit will draw power from the battery.
! When the Power Save is on, calls cannot be
received with this unit.
1
Use MULTI-CONTROL to select
POWER SAVE in the initial setting menu.
Refer to Adjusting initial settings on page 42.
2
Press MULTI-CONTROL to turn the
power save on.
# To turn the power save off, press
MULTI-CONTROL again.
44
En
Resetting the Bluetooth
wireless technology module
Bluetooth telephone and Bluetooth Audio
data can be deleted. To protect personal infor-
mation, we recommend deleting this data be-
fore transferring the unit to other persons. The
following settings will be deleted.
! phone book entries on the Bluetooth tele-
phone
! registration assignment of Bluetooth tele-
phone
! call history of Bluetooth telephone
! history of the most recently connected
Bluetooth audio
1
Display the initial setting menu.
Refer to Adjusting initial settings on page 42.
2
Use MULTI-CONTROL to select
BT MEMORY CLR.
3
Push MULTI-CONTROL right to show a
confirmation display.
YES is displayed. Clearing memory is now on
standby.
# If you do not want to reset phone memory,
push MULTI-CONTROL left. The display reverts.
4
Press MULTI-CONTROL to clear the
memory.
CLEARED is displayed and the settings are
deleted.
Updating the software about
Bluetooth connection
This function is used to update this unit with
the latest software. For about software and up-
dating, refer to our website.
Important
Never turn the unit off while the software is being
updated.
1
Display the initial setting menu.
Refer to Adjusting initial settings on page 42.
Hide quick links:
Advertisement
Table of Contents
