Table of Contents
Advertisement
Initial Settings
1
Display the initial setting menu.
Refer to Adjusting initial settings on the pre-
vious page.
2
Use MULTI-CONTROL to select
WARNING in the initial setting menu.
3
Press MULTI-CONTROL to turn warning
tone on.
# To turn warning tone off, press
MULTI-CONTROL again.
Switching the auxiliary setting
It is possible to use auxiliary device with this
unit. Activate the auxiliary setting when using
auxiliary device connected to this unit.
1
Display the initial setting menu.
Refer to Adjusting initial settings on the pre-
vious page.
2
Use MULTI-CONTROL to select AUX in
the initial setting menu.
3
Press MULTI-CONTROL to turn AUX on.
# To turn AUX off, press MULTI-CONTROL
again.
Setting the rear output and
subwoofer output
This unit's rear output (rear speaker leads out-
put and RCA rear output) can be used for full-
range speaker (Rear SP :REAR) or subwoofer
(Rear SP :SUB W) connection. If you switch
the rear output setting to Rear SP :SUB W, you
can connect a rear speaker lead directly to a
subwoofer without using an auxiliary amp.
Initially, the unit is set for rear full-range speak-
er connection (Rear SP :REAR).
1
Display the initial setting menu.
Refer to Adjusting initial settings on the pre-
vious page.
2
Use MULTI-CONTROL to select REAR SP
in the initial setting menu.
3
Press MULTI-CONTROL to switch the
rear output setting.
Pressing MULTI-CONTROL will switch be-
tween Rear SP :REAR (full-range speaker) and
Rear SP :SUB W (subwoofer) and that status
will be displayed.
# When no subwoofer is connected to the rear
output, select Rear SP :REAR (full-range speaker).
# When a subwoofer is connected to the rear
output, select Rear SP :SUB W (subwoofer).
Notes
! Even if you change this setting, there is no
output unless you turn the subwoofer output
on (refer to Using subwoofer output on page
40).
! If you change this setting, subwoofer output
in the audio menu will return to the factory
settings.
! Both rear speaker lead outputs and RCA rear
output are switched simultaneously in this
setting.
Switching the ever scroll
When Ever Scroll is set to ON, recorded text in-
formation scrolls continuously in the display.
Set to OFF if you prefer the information to
scroll just once.
1
Display the initial setting menu.
Refer to Adjusting initial settings on the pre-
vious page.
2
Use MULTI-CONTROL to select
EVERSCROLL in the initial setting menu.
3
Press MULTI-CONTROL to turn the ever
scroll on.
# To turn the Ever Scroll off, press
MULTI-CONTROL again.
Section
10
43
En
Hide quick links:
Advertisement
Table of Contents
