Advanced Programming (Optional) - NAPCO GEM-RP8LCD Operating Manual

A D V AN C E D P R O G R AM M I N G ( O P T I O N AL )
Programming Zone Descriptions
The zone descriptions which appear on the keypad display may be programmed in Program Mode.
A C T I V A T E
P R O G R A M
Z N D E S C R I P T I O N S
M O D E
0 1 - _ Z O N E 1
0 1 - F R O N T D O O R
Enter the User Program Mode
1 Press to enter the Function Menu.
R
2 Press until "ACTIVATE PROGRAM" is displayed, then press
Q
FOR PROGRAM MODE" will display. Enter User 1 code and press
the keypad will enter the Zone Descriptions Mode and display the Zone 1 Description.
Entering a new zone description
Use buttons
1
Use buttons
3
Use buttons
4
With the cursor located under a word, use button
left, and use
8
Use the above buttons to enter each character of the description and then press
save when the zone description is complete.
To advance to the next zone (or to any other zone):
Press to scroll forward (and
R
tions.
To save time, use the Quick Word List, explained in the following section.
and to position the cursor within the display.
2
and to scroll through numbers, letters and a variety of symbols.
6
and to erase while moving backwards and forwards.
5
to move the word to the right.
to scroll backward) through the zone descrip-
B
U
. "ENTER CODE
U
. Press
to move the entire word to the
7
and
R
U
to
19