Electrostatic Discharge (Esd) Precautions - Lexicon MC-12 Upgrade Instructions

ELECTROSTATIC
DISCHARGE (ESD)
PRECAUTIONS
CAUTION
A Harman International Company
Lexicon, Inc.
3 Oak Park
Bedford, MA 01730-1441 USA
Tel 781-280-0300
Fax 781-280-0490
www.lexicon.com
Customer Support
Tel 781-280-0300
Fax 781-280-0495 (Sales)
Fax 781-280-0499 (Service)
Lexicon Part No. 070-14894 | Rev 0 | 11/01
The following practices minimize possible damage to components resulting from electrostatic discharge or
improper insertion:
• Keep parts in original containers until ready for use.
• Avoid having plastic, vinyl, or styrofoam in the work area.
• Wear an anti-static wrist strap.
• Discharge personal static before handling devices.
• Remove and insert boards with care.
• When removing boards, handle only by non-conductive surfaces and never touch open-edge connectors
except at a static-free workstation. To make a plastic-laminated workbench anti-static, wash with a solution of
Lux liquid detergent, and allow to dry without rinsing.
These service instructions are for use by qualified personnel only.
WARNING
Do not perform any servicing other than that contained in these
instructions unless qualified to do so. Refer to the Safety
Summary on the previous page prior to performing any service.
© 2001 Lexicon, Inc. All rights reserved.
This document should not be construed as a commitment on the part of Lexicon, Inc. The information it contains is subject to change
without notice. Lexicon, Inc. assumes no responsibility for errors that may appear within this document.