Programme Setup; Auto Search; Manual Adjust; Fine - Sharp Aquos LC-32D44E Operation Manual

Menu operations

Programme Setup

This section describes how to set up analogue TV
channels manually.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Setup".
3
Press a/b to select "Programme Setup", and
then press OK.
If you have already set the PIN under "Child
Lock", enter it here.
• See page 17 for setting PIN.
4
Press a/b to select "Auto Search", "Manual
Adjust", "Sort" or "Erase Programme", and then
press OK.

Auto Search

Manual Adjust

Sort
Erase Programme
Auto Search
You can automatically search for and download TV
channels by performing the procedure below. This is
the same function as from programme auto search to
preset download in Auto Installation.
1
Repeat steps 1 to 4 in Programme Setup.
2
Press c/d to select "Yes", and then press OK.
1 Programme auto search
2 Auto labelling
3 Auto sorting
4 Preset download
Manual Adjust
You can set some channel items manually.
[ Setup ... Programme Setup ]
MENU

Fine

[179.25]

Colour sys.

[AUTO]
Sound sys. [B/G]

Label

[SAT.1]

Skip

[Off]

Decoder

[Off]
Lock [Off]
1
Repeat steps 1 to 4 in Programme Setup.
2
Press c/d to select "Yes", and then press OK.
3
Press a/b/c/d to select the channel you
want to edit, and then press OK.
• The selected channel information displays.
16
TV only
No Yes
179.25 MHz
4
Press a/b to select the desired menu item,
and then press OK.
5
Press a/b/c/d to select or adjust.
NOTE
• When you exit Programme Setup "Manual Adjust"
menu, preset download automatically runs if you change
information on that menu.
Fine
You can adjust the frequency to your desired position.
NOTE
• Adjust while checking the background picture as a
reference.
• Instead of pressing c/d to adjust the frequency in step
5 above, you can set by directly entering the frequency
number of the channel with 0–9.
EXAMPLE
• 179.25 MHz: Press 1 s 7 s 9 s 2 s 5.
• 49.25 MHz: Press 4 s 9 s 2 s 5 s OK.
Colour sys.
Select the optimum colour systems to receive. (AUTO,
PAL, SECAM)

Sound sys. (Broadcasting system)

Select the optimum sound systems (Broadcasting
systems) to receive. (B/G, D/K, I, L, L')
Label
When a TV channel sends its Network Name, the Auto
Installation detects the information and assigns a name
to it. However, you can change individual channel
names.
1
Repeat steps 1 to 4 in Manual Adjust.
2
Press a/b/c/d to select each character of
the new name for the channel, and then press
OK.
3
Repeat step 2 above until the name is fully spelt
out.
• The name can be 5 characters or less.
• If a channel name is less than 5 characters, select
"END", then press OK.
Skip
Channels with "Skip" set to "On" are passed over when
using P (r/s) even if selected while watching the
image from the TV.
Decoder
When connecting a decoder to the unit, you need to
select EXT1.
NOTE
• "Off" is factory preset value.