Auto Installation; Programme Setup - Sharp LC-32L450X Operation Manual

Checking Signal
information (Continued)
H Checking Signal information
Press a / b to select "Signal information".
Auto search
Manual search
Manual adjust
Signal information
Antenna power
4
Position and align the antenna so that the
maximum possible values for "Signal strength"
and "Signal quality" are obtained.
NOTE
• The values of "Signal strength" and "Signal quality" indicate
when to check the appropriate alignment of the antenna.

Auto installation

You can run auto installation again, even after setting
up the preset channels.
Press MENU and the MENU screen displays.
1
Press c / d to select "Setup".
2
Press a / b to select "Auto installation", and
3
then press ENTER.
4
If you have already set the password, enter it
here.
• See page 12 for setting a password.
Press c / d to select "Yes", and then press
5
ENTER.
6 Press a / b / c / d to select "DTV", "ATV" or
"ATV + DTV", and then press ENTER.
Press a / b to select the desired sound
system, and then press ENTER.
• Sound system is selectable when the signal search
is set to "ATV" or "ATV + DTV" mode only.
You do not need to do anything during the
auto search. Press MENU to exit.
8
68
Channel number
Signal strength
100 100
Current Maximum
Signal quality
98 98
Current Maximum

Programme setup

Digital settings
You can reconfi gure DTV services settings automatically
or manually.
Press MENU and the MENU screen displays.
1
Press c / d to select "Setup".
2
3 Press a / b to select "Digital programme
setup", and then press ENTER. If you have
already set the password, enter it here.
• See page 12 for setting a password.
Press a / b to select the desired menu item,
4
and then press ENTER.
Press c / d to select "Yes", and then press
5
ENTER.
H Auto search (Digital)
Use this menu to add new services automatically after
auto installation has been completed.
H Manual search (Digital)
Add new services within a specifi ed frequency band.
c/d
• Press
to select the frequency and then press ENTER.
H Manual adjust (Digital)
Confi gure various settings for each service using the
Colour (R, G, B) buttons.
Digital programme setup]
Press a / b to select desired service.
1
2
Press the colour button on the remote control
corresponding with the item you want to
reconfi gure.
• Each time the colour button is pressed, you can
switch the corresponding operation on/off.
Buttons for Manual adjust operation
Remote
Menu
control
items
buttons
Lock R When the service is locked,
you must enter your password
whenever you tune to the service.
CH G
Services with "Skip" are passed
over when pressing r / s in the
Skip
TV/remote control unit.
Sort B The item position of services can be
sorted.
Description