Table of Contents
Advertisement
S YSTEM
1 7 B
1 3 0 B
F unction 1,2,3,4
1 3 1 B
Assigns a function to each function button. See FRONT section for detail.
B acklight
1 3 2 B
Set the backlight intensity from 0 to 40. An LCD panel requires more than 30
minutes to settle to a new backlight value before final monitor calibration.
F ront Button LED
1 3 3 B
Set front LEDs on/off status.
F ont Button Lock
1 3 4 B
Locks front buttons not to work. Press and hold Menu button for 3 seconds to exit
from this mode.
U pdate Firmware
1 3 5 B
Turns update mode on. Select Serial or USB port for update. After firmware
update, the monitor should be turned off/turned on, and Factory Default should be
loaded before use.
S etup Load
1 3 6 B
Load monitor settings from Factory Default, User 1/2/3/4.
S etup Save
1 3 7 B
Save current monitor setting to use later. Four settings can be saved.
F irmware Version
1 3 8 B
This version number is required when you request for service.
O perating Time
1 3 9 B
This indicates total hours that the monitor operated.
24
Advertisement
Table of Contents
