Table of Contents
Advertisement
E xternal Remote Control
1 8 B
C onnecting GPI Port (RJ-45)
1 4 0 B
Turning the monitor off is recommended before cable connection. Assignable
functions are listed below.
Function Name
SDI-1 Input
SDI-2 Input
HDMI Input
YPbPr Input
CVBS-1 Input
CVBS-2 Input
CVBS-3 Input
KEY-UP ▲
KEY-DOWN ▼
KEY- MENU
KEY-ENTER
Aspect
1:1 Scan On/Off
H/V Delay On/Off
TC Display On/Off
ALM Display On/Off
Freeze On/Off
Front Button LED On/Off
Tally Red On/Off
Tally Green On/Off
B acklight
1 4 1 B
Set the backlight intensity from 0 to 40. An LCD panel requires more than 30
minutes before mfinal monitor calibration.
F ront Button LED
1 4 2 B
Set front LEDs on/off status.
Description
Switches the input to SDI-1
Switches the input to SDI-2
Switches the input to HDMI
Switches the input to YPbPr
Switches the input to CVBS-1
Switches the input to CVBS-2
Switches the input to CVBS-3
CURSOR UP on Menu Control.
CURSOR DOWN on Menu Control.
Menu On/Off
Enter Button
Aspect On/Off
1:1 SCAN Function On/Off
H/V Delay Function On/Off
TC Display On/Off
Audio Level Meters Display On/Off
Freeze Frame On/Off
Front Button LED On/Off.
Tally Red LED On/Off
Tally Green LED On/Off
25
Advertisement
Table of Contents
