Table of Contents
Advertisement
O SD Menu
0 B
Menu opens up by pressing Menu button. This button also works as Exit button on
the Menu. The brightness knob works as up/down arrow. To select something,
press either enter button or the knob.
* The menu may disappear on no signal or instable signal input.
* Menu setting is saved for each input mode. So the user should make
selection on an appropriate input mode.
V IDEO
8 B
B rightness
5 4 B
Adjust brightness. Default: 127.
C ontrast
5 5 B
Adjust contrast. Default: 127.
C hroma (Hue)
5 6 B
Adjust chroma. Default: 127.
P hase
5 7 B
Adjust phase. Default: 127.
S harpness
5 8 B
Adjust sharpness. Default: 18.
S DI 3G Mode
5 9 B
Set this mode if the input is 3G HD SDI. SDI 3G mode support SMPTE standards
listed below:
▶ A_M S1_YCbCr 422_10
: 3G SDI Level-A Mapping Structure 1 – YCbCr
▶ A_M S2_YCbCr 444_10
: 3G SDI Level-A Mapping Structure 2 – YCbCr 4:4:4/10 bit
4:2:2/10 bit
10
Advertisement
Table of Contents
