Table of Contents
Advertisement
didn't change long on interlace signal.
* On SDI 2K input with Psf scanning mode, displaying Circle or
Horizontal Line pattern might cause an afterimage effect. However, it
will be disappeared after the picture is changed.
1 1) False Color
3 7 B
Shows pictures in specific colors as its luminance level other than the original
colors. Overexposed area is filled with red while little exposed area is purple.
* 10-bit, 12-bit Dithered gradient pattern might not be displayed
clearly in this mode.
1 2) Power Button
3 8 B
Power turns off when pressed for one second.
1 3) Tally Lamp
3 9 B
Tally lamp displays Red, Green, Amber color tally.
1 4) Focus Assist
4 0 B
Displays focus area when pressed. The focus sensitivity is adjustable on the
display menu.
1 5) R/G/B/Gray Only
4 1 B
Displays Red, Green, Blue or Gray only as the button is pressed.
1 6) Audio Out
4 2 B
Stereo headphone jack for audio output.
1 7) Menu Button
4 3 B
Menu and Exit button.
1 8) Knobs
4 4 B
Brightness, Contrast, Chroma, Volume adjustable knobs. The brightness knob is
also used as arrow knob to move up and down on the menu, User Zoom, etc.
7
Advertisement
Table of Contents
