System - Ikan MS21-V2 User Manual

SYSTEM

Function 1,2,3,4
Assigns a function to each function button. See FRONT section for detail.
Backlight
Set the backlight intensity from 0 to 40. An LCD panel requires more than 30
minutes to be settled to a new backlight value.
Front Button LED
Set front LEDs on/off status.
Font Button Lock
Locks front buttons not to work. Press and hold Menu button for 3 seconds to exit
from this mode.
Update Firmware
Turns update mode on. Select Serial or USB port for update. After firmware
update, the monitor should be turned off/turned on, and Factory Default should be
loaded before use.
Setup Load
Load monitor settings from Factory Default, User 1/2/3/4.
Setup Save
Save current monitor setting to use later. 4 settings can be saved.
20