Common Radio Features
Conventional Talkgroup Calls
(Conventional Operation Only)
Talkgroup Call lets you define a group of conventional system users
so that they can share the use of a conventional channel.
Encryption keys are slaved to talkgroups. When talkgroups are
enabled, encryption keys are changed by changing the active
talkgroup. See "Secure Operations" on page 65.
Select a Talkgroup
1
Press u to find TGRP.
2
Press D, E, or F
directly below TGRP. You see
The last talkgroup that was
selected and stored, and SEL
and PSET
.
3
Press v or u to find the
talkgroup you want.
4
Press D, E, or F
directly below SEL or PSET.
SEL (SELECT) — Saves the currently displayed talkgroup and
returns to the home display.
PSET (PRESET) — Selects the preset preprogrammed talkgroup.
If the encryption key slaved
to the new talkgroup is
erased, you see KEY FAIL
and hear a momentary key
fail tone.
If the encryption key that is
slaved to the new talkgroup
is not allowed, you see
ILLEGAL KEY and hear a
momentary key fail tone.
58
TGRP
SEL PSET
SEL PSET
KEY FAIL
•
Momentary key fail tone
ILLEGAL KEY
•
Momentary key fail tone