Making A Selective Call; Using The Talkgroup Call Feature (Conventional Operation Only); Selecting A Talkgroup - Motorola ASTRO APX 7000 Series Quick Reference Card

Making a Selective Call

Procedure:
Press the preprogrammed Quick Access (One-Touch)
Selective Call button to dial the preprogrammed ID number
and proceed to Step 5 of the procedure below.
OR
Follow the procedure below.
< >
to Call.
1
or
Press the Menu Select button directly below Phon. The
2
display shows the last transmitted or received ID number.
3 Press Lnum to go to the last number dialed.
OR
U D
or to the required ID number.
OR
Use the keypad to enter the required ID number.
4
Press the PTT button to start the Selective Call.
5
Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from
your mouth.
6
When you are connected, the display shows the ID number
of the target radio. Press and hold the PTT button to talk.
Release the PTT button to listen.
H
7
Press to hang up and return to the home display.
32
English
Using the Talkgroup Call Feature (Conventional
Operation Only)
This feature allows you to define a group of conventional
system users so that they can share the use of a conventional
channel.
Note: Encryption keys are slaved to talkgroups. When
talkgroups are enabled, encryption keys are changed
by changing the active talkgroup. See Secure
Operations on page 63.

Selecting a Talkgroup

Procedure:
< >
to Tgrp.
1
or
2 Press the Menu Select button directly below Tgrp. The
display shows the last talkgroup that was selected and
stored, Sel and Pset.
U D
3
or to the required talkgroup.
OR
Use the keypad to enter the number of the corresponding
talkgroup in the list.
4 Press the Menu Select button directly below Sel to save the
currently displayed talkgroup and return to the home
display.
OR