Motorola ASTRO XTS 5000 User Manual page 3

ASTRO Digital XTS 5000
®
Model II Radio
Quick Reference Card
Concentric
Switch
_ _ _ _ _ _
On/Off/
Volume Knob
Top Side
Button
_ _ _ _ _ _ _
Side Button 1
_ _ _ _ _ _ _
Side Button 2
_ _ _ _ _ _ _
PTT Button
Home Button
4-Way
Navigation
Button
Write your radio's programmed features on the
dotted lines.
™
Radio On/Off
1 On - On/Off/Volume knob clockwise.
2 Off - On/Off/Volume knob counterclockwise.
Zones/Channels
1 Zone - Zone switch to desired zone.
16-Position
2 Channel - Channel switch to desired channel.
Select Knob
_ _ _ _ _ _ _
Top Button
Receive/Transmit
_ _ _ _ _ _ _
1 Radio on and select zone/channel.
3-Position
2 Listen for a transmission.
Switch
_ _ _ _ _ _ _
- or -
Press and hold Volume Set button.
Speaker/Mic
- or -
Press Monitor button and listen for activity.
Display
3 Adjust volume, if necessary.
Menu Select
4 Press PTT to transmit; release to receive.
Buttons
Alpha Button
(for future Send Emergency Alarm
use)
Radio on and press Emergency button.
Display shows current zone/channel and
EMERGENCY. Red LED lights; you hear short,
medium-pitched tone.
Note: To exit emergency at any time, press and
hold Emergency button.
When acknowledgment is received, you hear
four beeps; alarm ends; radio exits emer-
gency.
Send Emergency Call
1 Radio on and press Emergency button.
Note: To exit emergency at any time, press and
hold Emergency button.
2 Press and hold PTT. Announce your
emergency into the microphone.
3 Release PTT to end call.
4 Press and hold Emergency button to exit
emergency.
Send Silent Emergency Alarm
1 Radio on and press Emergency button.
Display does not change; you see no LED;
you hear no tone.
Note: To exit emergency at any time, press and
hold Emergency button.
2 Silent emergency continues until you:
• Press and hold Emergency button to exit
emergency state.
- or -
• Press and release PTT to exit silent
emergency and enter regular emergency
(alarm, call, or alarm with call).