Table of Contents
Advertisement
Special Programming Mode (SPM)
A Valid Button Press tone sounds when the new
setting is stored.
To abort data entry, select another menu item by
turning the Selector Knob (2) or wait until the edit
mode time-out (after 5 seconds of inactivity).
Editing Time Out Timer
In SPM, rotate the Selector Knob (2) to the Edit
Time Out Timer (
xxx represents one of
default display of
setting of one minute. If the display shows
this indicates that the time-out timer is disabled.
This means that there is no limit on the transmit
time.
Use
or
to change the current status.
CAUTION
The new setting is stored immediately.
To exit this menu, select another menu item by
turning the Selector Knob (2).
Setting the Selective Call Tone Status
The radio must be equipped with a DTMF Decode
board top support the Selective Call Tone Status
operation.
2-Year Warranty
NOTE
xxx) menu.
NOTE
,
,
, .....,
. The
shows the time-out timer
NOTE
,
53
Advertisement
Table of Contents
