Table of Contents
Advertisement
Special Programming Mode (SPM)
CAUTION
The new setting is stored immediately.
To exit this menu, select another menu item by
turning the Selector Knob (2).
NOTE
When Autosense is selected, the radio checks the
accessory jack to see what type of accessory is
connected. When Headset Only is selected, the
radio supports only an earpiece or headset, and all
external PTT inputs are ignored. When Speaker
Microphone Only is selected, the radio assumes
that an accessory with an external PTT switch will
be used to transmit voice. The radio's internal
microphone will not transmit voice whenever an
accessory is connected.
IMPORTANT
The radio should be turned off when an audio
accessory with a microphone is connected to the
radio. This is to ensure the proper operation of the
Push-To-Talk (PTT) Button (6) .
Factory Reset Feature
This feature is intended to allow the user to erase cer-
tain programmable parameters and restore the radio
to the factory default settings. The radio, upon factory
reset, clears all memory channels stored in the non-
volatile memory area, clears all phone number storage
locations, and restores the default settings to the dif-
ferent user-modifiable parameters (coded squelch
type, squelch level, channel-step size, etc.).
57
2-Year Warranty
Advertisement
Table of Contents
