Motorola AP 73 User Manual page 58

Special Programming Mode (SPM)
The LCD Screen (18) shows the new digits as they
are being entered. When the cursor is flashing
under a digit, the maximum number has been
entered. Use or
ing code and to erase unwanted digits.
Pause digit (
between transmission of the digits programmed
before and after it. One or more pause digits can be
entered between successive digits of the phone
access / deaccess codes. When a pause digit is
successfully keyed, two beeps are heard; the dis-
play changes from 'A' to '-'. Pause digits placed at
the end of a phone number are not remembered by
the radio.
Press the Toggle Light / Enter and Parameter
Transfer Button (4) to store the new code and return
to SPM Browse Menu.
A Valid Button Press tone sounds when the new
setting is stored.
To abort data entry, select another menu item by
turning the Selector Knob (2) or wait until the edit
mode time-out (after 5 seconds of inactivity).
Edit PTT ID
In SPM, rotate the Selector Knob (2) to the PTT ID
( ) menu.
Press or
50
NOTE
to scroll through the exist-
NOTE
)causes the radio to wait in
NOTE
to enter the edit mode.
2-Year Warranty