Table of Contents
Advertisement
Special Programming Mode (SPM)
The Factory Reset feature does not clear the IDs or
access / deaccess codes.
In SPM, press and hold Push-To-Talk (PTT) But-
ton (6) while keying
sequence.
As the sequence is entered, the LCD Screen (18)
(which is initially cleared) displays an
digit entered.
Any incorrect digit entered results in an invalid key-
press tone, the LCD Screen (18) is cleared again
and the you must reenter the sequence, starting
with the first digit. Once the sequence has been
entered successfully, the LCD Screen (18) displays
, indicating that the reset procedure is
ready to be activated.
Press Toggle Light / Enter and Parameter Transfer
Button (4) to confirm the reset process (pressing
any other key or releasing Push-To-Talk (PTT) But-
ton (6) cancels the process and returns the radio to
the SPM Browse menu).
The display blanks when the reset is in progress.
When the process is successfully completed, it
returns to SPM Browse Menu .
58
NOTE
1
3
5
7
,
,
,
,
NOTE
for each
NOTE
NOTE
2-Year Warranty
9
in
Advertisement
Table of Contents
