Motorola AP 73 User Manual page 51

All undefined digits are represented by underscores
on the LCD Screen (18) . A flashing '_' indicates the
position for the next number entry. If you reach the
maximum number of entries, the cursor position is
under the last digit. An Invalid Button Press tone
will sound if you attempt to enter more than the
maximum number of digits.
Press the Toggle Light / Enter and Parameter
Transfer Button (4) to store the phone number (or
access / deaccess code) into the designated loca-
tion and return to normal operation.
Displaying a Stored Phone Number
Press momentarily in the receive mode. A
Valid Button Press tone is heard.
Enter a one-digit phone number location (in the
range of 1 to 9) to view the stored phone number or
press to view the access code or
the deaccess code or
ber dialled.
If the keypad entry is valid, the LCD Screen (18)
displays the first 6 digits of the stored phone num-
ber or code. For number sequences more than 6
digits, after 2 seconds the number begins auto-
scrolling to the left in 1 second increments until the
last digit is displayed. If the selected phone location
is empty, an Invalid Button Press tone is heard.
2-Year Warranty
DTMF Telephone Interconnect
NOTE
to view
to review the last num-
NOTE
43