Selecting The Destination Address By Voice Command; Points Of Interest - Navigon 83 series User Manual

The (N S) button alongside the entry box indicates whether it is a
northern or southern degree of latitude.
Tap on the button if you want to change the current setting.
►
4. Enter the degree of longitude.
Use the corresponding buttons shown on the keyboard in order to
enter the units:
The (E W) button alongside the entry box indicates whether it is an
eastern or western degree of longitude.
Tap on the button if you want to change the current setting.
►
6.2.4

Selecting the destination address by voice command

It is particularly convenient to select the destination address by voice
command.
1. In the N
The V
Indicated at the top is the country for which you can select
addresses.
Tap on the country if your destination address is situated in a
►
different country. Then follow the instructions given by the
navigation system.
You will be asked for the address data in this order: City > Street >
House number.
2. Follow the instructions given by the navigation system.
When you have finished entering the address, the map will open in
Preview mode. The destination is indicated on the map.
For detailed information on how to start navigation, please refer to
chapter "Route preview" on page 37. Please read on there.
Note: The Voice Command function is not available for every
language. In the languages for which this function is not available, the
Voice Command button is replaced by the Show Map button.
6.2.5

Points of interest

Points of Interest, called POI for short, are useful addresses that are
catalogued according to particular criteria.
Navigation
(degrees),
(degrees),
window tap on Voice Command.
AVIGATION
window opens.
C
OICE OMMAND
User's manual NAVIGON 83xx
(minutes),
(minutes),
(seconds).
(seconds).
- 29 -