Entering A Destination By Voice Commands - Navigon 84 series User Manual

User's manual NAVIGON 8410
►
The D
Indicated on the Activate MyRoutes button is whether several route
suggestions are to be calculated (Yes) or not (No).
►
5. Tap on Start Navigation in order to navigate to the stipulated
address
- or -
Tap on Parking in order to search for and navigate to a car park
near your destination.
Note: If the destination with the coordinates you entered does not lie on
the road system covered by the map, navigation will be performed as
far as the nearest road point using the mode defined by the selected
route profile. From this point on, the navigation system will automatically
switch to Offroad mode. (Refer to "Navigation in Offroad mode" on
page 63)
7.2.4

Entering a destination by voice commands

It is particularly convenient to select the destination by voice
commands.
1. In the N
- or -
Activate the voice commands function by drawing your finger
quickly over the N
"Voice Command".
The V
Entering an address
2. Say "Address".
Indicated at the top is the country for which you can select
addresses.
►
You will be asked for the address data in this order: City > Street >
House number.
3. Follow the instructions given by the navigation system.
When you have finished entering the address, the map will open in
Preview mode. The destination is indicated on the map.
- 32 -
Tap on the button if you want to change the current setting.
ETAILED INFORMATION ABOUT THE DESTINATION
Tap on Activate MyRoutes in order to change the setting.
window tap on Voice Command.
AVIGATION
AVIGATION
window opens.
C
OICE OMMAND
Tap on the country if your destination address is situated in a
different country. Then follow the instructions given by the
navigation system.
window in a diagonal line. Then say
window opens.
Navigation