Showing A Single Message In Detail; Tmc Settings - Navigon 83 series User Manual

User's manual NAVIGON 83xx
8 Here you can see on which section of the road the obstruction lies.
9 The navigation system can Detour (
the route. The button shows the active status.
Tap on the button to select the alternative setting.
►
10 (Show on Map): This button is only available if at least one of the
indicated messages concerns your route. Tap on this button in order to
open the P
8.7.3

Showing a single message in detail

Tap on a message to display this information in detail.
►
The NAVIGON 83xx announces the traffic message in question if the
detail view is open. The announcement of traffic messages is not
possible in every language however.
Tap on the
►
concerned on the map.
8.7.4

TMC Settings

In the Settings window tap on T
►
In the TMC S
configure whether the reception of a traffic message concerning your
route should affect your route planning and if so how.
Tuning Mode
Tap on Tuning Mode and select a method for selecting the TMC radio
station.
Automatic: You can use the arrow keys in the station area to select
►
another station. The system will search for another station if
reception becomes poor.
Hold station: You can use the arrow keys in the station area to
►
select another station. The system will search for the same station
on a different frequency if the signal becomes poor.
Hold frequency: You can use the arrow keys in the station area to
►
select another frequency. The system will not search for another
station if reception becomes poor.
Recalculate Route
Tap on Recalculate Route and select how new traffic messages
concerning your route are to be used.
Automatically: An alternative route will be calculated automatically.
►
The system will inform you on the recalculation.
- 64 -
TMC window. (See "Preview TMC" on page 61)
REVIEW
(Show on Map) button in order to view the section
window you can set the TMC traffic station and
ETTINGS
) or Ignore (
I
RAFFIC NFORMATION
) congestion on
.
Useful functions