Using Voice Commands; Saving A Destination With A Voice Command; Selecting A Destination Using A Voice Command - Navigon PNA 7100 User Manual

My Destinations

Using Voice Commands

Using Voice Commands
You can designate voice commands to destinations in the F
can start navigation to these destinations 'on command'. The route profile used for the
previous navigation applies.
You can add a voice command when you save the destination or at a later time.

Saving a destination with a voice command

1. Select the destination from the F
voice command. (See "Selecting a destination from the Last Destinations list" on
page 49.)
2. Tap Options
3. After the beep, speak the name of the destination.
You are prompted to repeat the voice command into the NAVIGON 7100 for the
selected destination.
4. Repeat the command for the selected destination into the
The window closes.
The destination now appears in the F
it has a voice command.

Selecting a destination using a voice command

In the M
AIN
1. Tap the
2. When prompted, repeat the voice command that you have stored for the desired
destination into the
A window displays the name of the destination.
3. Tap the
The map opens in Preview mode.
52
> Store a Voice Command
W :
INDOW
button.
Voice Command
NAVIGON 7100
button.
Start Navigation
NAVIGON 7100 User's Guide
NAVIGON, INC.
list for which you would like to set up a
AVORITES
.
list marked by a symbol indicating that
AVORITES
.
list so that you
AVORITES
.
NAVIGON 7100
January 2008
Revision 2.0