Page 1
Wichtig:Unbedingt lesen und aufbewahren! Important:Read these instructions carefully and then store them in a safe place Important:Lire attentivement et ranger soigneusemnt ce mode d’emploi Integrierte Kühlschrank Integrated Refigerator Réfrigérateur a intégrer Modell: IKE 178-7 2-12 13-23 24-34 200382515 N/Kü/7. (09.)
Page 2
Before installing and using the appliance read this user's instruction book carefully. It contains safety precau- tions, hints, information and ideas. If the refrigerator is used in compliance with the instructions written, it will operate properly and provide you with greatest satisfaction. The symbols below help you to find things more easily: Safety precautions Warnings and information at this symbol serve safety for you and your appliance.
Contents Safety Instructions ............................15 Diposal ..............................16 Use and Control / Before Use..........................17 Starting the appliance / Temperature Control......................17 Iternal parts / Storage shelves / Door shelves......................17 Hints...............................18 Maintenance ............................18 Defrosting..............................19 Regular cleaning............................19 How to change the bulb ..........................20 Something not Working ..........................21 Customer Service and Spare Parts......................22 Installation ...............................22 Positioning .............................22...
Safety Instructions In the interest of your safety and to ensure the correct The refrigerant isobutane (R600a) is contained use, before installing and first using the appliance, within the refrigerant circuit of the appliance, a read this user manual carefully, including its hints and natural gas with a high level of environmental warnings.
Frozen food must not be re-frozen once it has been The appliance must not be located close to radi- thawed out. ators or cookers. Store pre-packed frozen food in accordance with Make sure that the mains plug is accessible after the frozen food manufacturer's instructions.
Use and Control Before Use Setting "1" = hightest temperature, warmest setting Wait 4 hours before connecting the appliance Setting "6" = lowest temperature, coldest set- to allow the oil to flow back in the compressor. ting. Before using the appliance for the first time, wash Setting "O"= Off the interior and all internal accessories with luke- warm water and some neutral soap so as to...
Butter & cheese: these should be placed in special airtight containers or wrapped in aluminium foil or poly- thene bags to keep out as much air as possible. Milk bottles: these should have a top and should be stored in the bottle rack on the door. Bananas, potatoes, onions and garlic, if not packed, must not be kept in the refrigerator.
Temperature of the freezer The internal temperature is influenced by the following fac- tors: - Room temperature - How often the door is opened - Amount of food products stored - Appliance setting Caution: Check the state of the frozen foods if the freezer compartment heats up.
Regular cleaning It is recommended to wash the inside of the refrigerator in 3-4 weeks time. Household cleaner or soap must not be used. After you made it no-current wash the appliance using lukewarm water and wipe it. Clean the magnet door rubber profile with clean water. After cleaning plug the appliance to the mains socket.
Something not Working Problems may be due to causes which can easily be solved before calling the Technical Service. Please follow these instructions: SYMPTOM SOLUTION Door does not close Weight surpasses the storage limit of the door shelf so spread weight more evenly or take some products out.
Customer service and spare parts Positioning If you cannot find the remedy for a malfunction in these oper- Unpack the cabinet and check that it is in good condi- ating instructions, please contact your dealer or our cus- tion and free of any transport damage. tomer service department and consult the Guarantee card.
Electrical connection Building-in Before plugging in, ensure that the voltage and frequen- Dimensioned drawing cy shown on the serial number plate correspond to your domestic power supply. Voltage can vary by ±6% of the rated voltage. For operation with different voltages, a suitably sized auto-transformer must be used.
Need help?
Do you have a question about the IKe 178-7 and is the answer not in the manual?
Questions and answers