CONTENTS Instructions for the user Instructions for the installer Important Safety Instructions Technical specifications Description of the Appliance Installation Positioning Electrical connection Door reversibility Cleaning the interior Instructions for totally built-in appliances Starting-up Temperature control Fresh food refrigeration Movable shelves Positioning the door shelves Hints Hints for refrigeration...
IMPORTANT SAFETY INSTRUCTIONS It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can be acquainted with the functioning of the appliance and the relevant warnings.
Installation Care must be taken to ensure that the appliance Parts which heat up should not be exposed. does not stand on the electrical supply cable. Wherever possible the back of the product should Important: if the supply cord is damaged, it must be against a wall.
Cleaning the interior Fresh food refrigeration Before using the appliance for the first time, wash the The refrigerator compartment is suitable for cooling interior and all internal accessories with lukewarm drinks and for normal food storing. water and some neutral soap so as to remove the To obtain the best performance, do not store warm typical smell of a brand-new product, then dry food or evaporating liquids in the refrigerator and do...
HINTS Hints for refrigeration To help you use your refrigerator correctly, here are some useful hints: Cooked food, cold cuts, jelly, etc.: these should be well covered and can be stored on any of the glass shelves. Fruit & vegetables: these should be thoroughly cleaned and placed in the bottom drawer.
Periodic cleaning Never use metal objects for clearing your appliance as it may get damaged. Clean the inside with warm water and bicarbonate of soda. Rinse and dry thoroughly. To guarantee a safe operation of the fridge, once a year remove the ventilation grille at the base and clean the air channels with a vacuum cleaner.
TECHNICAL SPECIFICATIONS The technical data is indicated in the rating plate on the left side inside the appliance. INSTALLATION lf this appliance featuring magnetic door seals is This appliance complies with EEC directive to replace an older appliance having a spring lock number, 87/308 of 2/6/87 relative to radio (latch) on the door or lid, be sure to make that interference suppression.
Instructions for totally built-in appliances Dimensions of the recess Height of housing mm 880 Depth of housing mm 550 Width of housing mm 560 D022 3. Slide the appliance into the recess, pushing it against the wall on the handle side. PR 32 1.
Page 10
PR266 PR167 6. Separate parts A, B, C, D as shown in the figure. 9. Open the appliance door and the furniture door at 90°. Insert the small square (B) into guide (A). Put together the appliance door and the furniture door and mark the holes as indicated in the figure.
Need help?
Do you have a question about the IKE 167-6 and is the answer not in the manual?
Questions and answers