Oce im2330 User Manual page 183

NETWORK SETTING - NETWORK SERVICE - FTP SERVER NETWORK SERVICE
Function
DEFAULT PORT NUMBER
ENABLE SSL
SSL PORT NUMBER
NETWORK SETTING - NETWORK SERVICE - SNMP NETWORK SERVICE
Function
ENABLE SNMP
READ COMMUNITY
ENABLE AUTHENTICATION TRAP
ENABLE ALERTS TRAP
IP TRAP ADDRESS1
IP TRAP COMMUNITY
IPX TRAP ADDRESS
NETWORK SETTING - NETWORK SERVICE - SNTP NETWORK SERVICE
Function
ENABLE SNTP
PRIMARY SNTP ADDRESS
SECONDARY SNTP ADDRESS
PORT NUMBER
SCAN RATE
Description
Shows the default port number to be used
for receiving data using FTP.
Shows whether the SSL for the FTP server
network service is enabled or disabled.
Shows the SSL port number to be used for
accessing the equipment using FTP.
Description
Shows whether the SNMP is enabled or dis-
abled.
Shows the read community name.
Shows whether the authentication trap is
enabled or disabled.
Shows whether the alerts trap is enabled or
disabled.
Shows the IP address that have been set for
IP trap address 1.
Shows the IP Trap community name.
Shows the IPX trap address.
Description
Shows whether the SNTP is enabled or dis-
abled.
Shows the primary SNTP server address if it
has been set.
Shows the secondary SNTP server address
if it has been set.
Shows the port number to be used for
accessing the SNTP server.
Shows the scan rate to check the SNTP
server for adjusting the time setting.
User
NO
NO
NO
User
NO
NO
5
NO
NO
NO
NO
NO
User
NO
NO
NO
NO
NO
179