Still Image Setting - Sanyo VPC-CG88EX Instruction Manual

Still image setting

For still images, you can select either the 4:3 or 16:9 horizontal to vertical
aspect ratio. This menu is also used for shooting sequential shots.
Sequential shots
1
Select : or t, and press the SET button.
h The camera changes to the sequential shots mode.
2
Press the [
h Shooting begins. Shooting continues as long as the [
kept pressed.
HINT
What is the maximum number of images in a sequential shots
sequence?
t: 22 images
:: 14 images
i If you continue shooting even after the maximum number of images has
been captured, recording does not stop.
i If you continue shooting after the maximum number of images has been
captured, subsequent captured images will overwrite the sequence
already captured, beginning from the first image in the sequence.
About the focus when shooting sequential shots
i When sequential shots are captured, the autofocus operates when the
[ ] button is pressed halfway, fixing the focus.
Can the flash be used?
i The flash does not operate when shooting sequential shots.
Did the angle of view change?
i When shooting sequential shots, the angle of view relative to that of still
image shooting may change.
About the PHOTO NR (page 124) setting
i During sequential shots shooting, the PHOTO NR setting automatically
turns OFF.
] button.
] button is
86
English