Still Image Setting - Sanyo VPC-CG10BK Instruction Manual

RECORDING MENU 1

Still image setting

For still images, you can select either the 4:3 or 16:9 horizontal to vertical
aspect ratio. This menu is also used for shooting sequential shots.
Sequential shots
1
Select m or t, and press the SET button.
h The camera changes to the sequential shots mode.
2
Press the [
h Shooting begins. Shooting continues as long as the [
kept pressed.
HINT
What is the maximum number of images in a sequential shots
sequence?
t: 14 images
m: 11 images
<At the t setting>
i If you continue shooting even after the maximum number of images has
been captured, recording does not stop.
i If you continue shooting after the maximum number of images has been
captured, subsequent captured images will overwrite the sequence
already captured, beginning from the first image in the sequence.
<At the m setting>
i After 11 images have been captured, the images are saved and recording
stops.
About the focus when shooting sequential shots
i When sequential shots are captured, the autofocus operates when the
[ ] button is pressed halfway, fixing the focus.
Can the flash be used?
i The flash does not operate when shooting sequential shots.
85
English
] button.
] button is