Light Bulbs; The Refrigerator - GE Model 21 Owner's Manual

Bottom freezer refrigerators
Table of Contents

Advertisement

Care and cleaning of the refrigerator.
1/4 Hex Head Screws
Back of Freezer
Front of Freezer
Freezer Light
1/4 Hex Head Screws
Refrigerator Light
10
Behind the Refrigerator
Be careful when moving the refrigerator
away from the wall. All types of floor
coverings can be damaged, particularly
cushioned coverings and those with
embossed surfaces.
Pull the refrigerator straight out and return
it to position by pushing it straight in.
Moving the refrigerator in a side direction
may result in damage to the floor covering
or refrigerator.
Preparing for Vacation
For long vacations or absences, remove
food and unplug the refrigerator. Move the
freezer control to the OFF position, and
clean the interior with a baking soda
solution of one tablespoon (15 ml) of
baking soda to one quart (1 l) of water.
Leave the doors open.
Preparing to Move
Secure all loose items such as grille, shelves
and drawers by taping them securely
in place to prevent damage.
Light Bulb Replacement
Light bulbs are located at the top of the
refrigerator and freezer compartments.
To replace a light bulb, unplug the
refrigerator's power cord plug from
the wall outlet.
Freezer Light
To remove light cover, remove the 1/4 hex
head screws at the back of the cover. Slide
the cover back and remove. After replacing
with the same size bulb, reinstall the light
cover and plug in the refrigerator.
When pushing the refrigerator back, make sure
you don't roll over the power cord or icemaker
supply line.
Move the icemaker feeler arm (for
icemaker equipped models) to the STOP
(up) position and shut off the water supply
to the refrigerator.
If the temperature can drop below freezing,
have a qualified servicer drain the water
supply system (for icemaker equipped
models) to prevent serious property
damage due to flooding.
Be sure the refrigerator stays in an upright
position during moving.
Refrigerator Light
To remove the light cover, remove the
1/4 hex head screws at the back of the
cover. Slide the cover back and remove.
After replacing with same size bulb, reinstall
light cover and plug in the refrigerator.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents