Electrical Connection
Before initial start-up, refer to the appliance rating plate to
ascertain if supply voltage and current values correspond
with those of the mains at the installation location.
e.g.:
AC 220 ... 240 V
220 ... 240 V ~50 Hz
(i.e. 220 to 240 volts alternating current, 50 Hertz)
The rating plate is inside the appliance on the left.
A correctly installed, earthed socket is required for the elec-
trical supply. The supply must have a fuse rating of at least
10 Amps.
Appliance Description
View of Appliance
(various models)
Control panel
Butter and cheese compartment with lid
Door storage compartment
Bottle compartment
Prior to Initial Start–Up
1. Please clean the appliance interior and all accessories
prior to initial start-up (see section: "Cleaning and Main-
tenance").
50 Hz or
If the socket is not accessible once the appliance is built in,
the electrical installation must include suitable means of
isolating the appliance from the mains (e.g. fuse, cut-out,
current trip or similar with a minimum contact separation of
3 mm).
Attention: The mains connection cable may only be
replaced by a skilled electrician. Please contact your dealer
or our customer service department for repairs.
Fruit and vegetable trays
Shelves
Rating plate
21