Caution! Plastic parts If this appliance, which has a magnetic door closure, To facilitate the disposal and/or recycling process, replaces an old machine with a mechanical door- most of the materials used in the appliance have lock, we recommend that you break this lock before been labelled so that they can be readily identified.
Page 3
WARNINGS It is most important that this instruction book should be should solid ice be forced off the liner. Solid ice retained with the appliance for future reference. Should should be allowed to thaw when defrosting the the appliance be sold or transferred to another owner, or appliance.
INSTALLATION If this refrigerator featuring magnetic door seals is Electrical connection to replace an older appliance having a spring lock Before plugging in, ensure that the voltage and (latch) on the door or lid, make sure that the spring frequency shown on the serial number plate lock is unusable before you discard the old correspond to your domestic power supply.
Page 5
Model Height of Depth of Width of strip (A). housing housing housing Fig. 3 IKE 167-4 880 mm 550 mm 560 mm IKE 197-4 1030 mm 550 mm 560 mm IKE 247-4 1225 mm...
Page 6
Apply covers (B) on joint cover lugs and into hinge Remove the little plates and make the holes with a holes. diam. of 2 mm. Replace the little plates over the runners and screw in the screws provided Fig. 6 (3.5x16 mm).
Page 7
Starting-up Butter & cheese: these should be placed in special airtight containers or wrapped in aluminium foil or Insert the plug into the wall socket. polythene bags to keep out as much air as possible. Open the door and turn the thermostat control Milk bottles: these should have a top and should be knob, to be found on the upper right hand side of the stored in the bottle rack on the door.
Page 8
Positioning the door shelves Defrosting To permit storage of food packages of various sizes, The refrigerating compartment evaporator is the door shelves can be placed at different heights. automatically defrosted every time the compressor To make these adjustments proceed as follows: stops.
MAINTENANCE Unplug the appliance before carrying out any Interior light maintenance operation. The light bulb inside the refrigerator compartment can be reached as follows: Warning unscrew the light cover securing screws; This appliance contains hydrocarbons in its cooling unit; maintenance and recharging must therefore unhook the moving part by pressing it as shown only be carried out by authorized technicians.
Need help?
Do you have a question about the IKE 167-4 and is the answer not in the manual?
Questions and answers