Table of Contents
Advertisement
Options Adjustments
Item
Whether to show/hide No activity power off Precautions at the time of power ON is set.
Power On Message
On:
(No activity power
Off:
off)
Note:
This setting is enabled only if "NO ACTIVITY POWER OFF" is "ENABLE" (see page 34).
Set the functions that operates when
Signal: The "SIGNAL" menu is displayed.
Screensaver: The "SCREENSAVER" menu is displayed.
ECO menu: The "ECO MODE SETTINGS" menu is displayed.
Set up TIMER: The "SET UP TIMER" menu is displayed.
Note:
Factory settings are as follows.
FUNCTION1 button: Signal
FUNCTION2 button: Screensaver
Function button assign 1
Function button assign 2
Use the FUNCTION button
Sets the lock setting for the display Power switch.
Power Switch Lock
On:
Off:
Normalization
When both main unit buttons and remote control are disabled due to the "Button lock", "Remocon User level" or "Remote
ID" adjustments, set all the values "Off" so that all the buttons are enabled again.
Press the
button on main unit together with
-
/
The "Shipping" menu is displayed and the lock is released when it disappears.
Input Search
When a signal is not detected, another input with a signal is automatically selected.
Options
Input Search
On
On screen display
Initial input
Off
Input Search
Off: When there is no signal, the input is not switched automatically.
All Inputs: Searches all inputs and switches to an input with a signal.
Priority: Searches "Primary Input" and "Secondary Input" in order and switches to an input with a signal.
SEARCHING...
"SEARCHING..." is displayed during the input search.
Primary Input, Secondary Input
Set the input to search when "Priority" is selected.
(NONE)
SLOT INPUT*
* "SLOT INPUT" is displayed when an optional Terminal Board is installed.
When a Terminal Board with dual input terminals is installed, "SLOT INPUT A" and "SLOT INPUT B" are displayed.
Note:
• This menu is available only when "Input lock" is "Off". (see page 46)
48
The warning precautions are shown at the time of power ON.
The warning precautions are not shown at the time of power ON.
The menu screen is displayed. (Example: Signal)
SIGNAL
3D Y/C FILTER
COLOR SYSTEM
3 : 2 PULLDOWN
NOISE REDUCTION
Press the FUNCTION button to exit from the menu.
Power switch operation is disabled.
Power switch operation is enabled.
1/3
Press ACTION ( ) button
VIDEO
Component/RGB
Adjustments
is pressed.
[ VIDEO ]
ON
AUTO
OFF
OFF
button on the remote control and hold for more than 5 seconds.
Input Search
Input Search
Primary Input
Secondary Input
PC
DVI
Off
HDMI
select
1
adjust
2
Hide quick links:
Advertisement
Table of Contents
