Noise Reduction; Sync; Hdmi Range - Panasonic TH-70LF50U Operating Instructions Manual

NOISE REDUCTION

Note:
NOISE REDUCTION can be adjusted while a Video or Component signal is being applied.

SYNC

This function operates only during input from PC IN terminal.
Con¿ rm that the input is set to RGB input (this setting is valid only for RGB input signal).
AUTO: The H and V sync or synchronized signal is automatically selected. If both input, it is selected the H and V sync.
However, the synchronized signal that is input ¿ rst is selected.
ON G: Uses a synchronized signal on the Video G signal, which is input from the G connector.
Note:
Accepts only RGB signals from COMPONENT/RGB IN terminal with "SYNC ON G".

HDMI RANGE

Switches the dynamic range according to the input signal from HDMI terminal.
VIDEO(16-235): If the input signal is the video range, Example: HDMI terminal output for DVD player
FULL(0-255): If the input signal is full range, Example: HDMI terminal output for personal computer
AUTO: Switches the dynamic range automatically between "VIDEO(16-235)" and "FULL(0-255)" according to the input signal.
Note:
This function can be set only for HDMI signal input.
Press to select "NOISE REDUCTION".
Press to select "OFF", "AUTO", "MIN", "MID", "MAX".
AUTO: NOISE REDUCTION will be automatically
selected from "MIN", "MID" or "MAX".
Press to select the "SYNC".
Press to adjust.
Press to select "HDMI RANGE".
Press to select "VIDEO(16-235)", "FULL(0-255)", "AUTO".
SET UP for Input Signals
NOISE REDUCTION
SIGNAL
SYNC
3 : 2 PULLDOWN
XGA MODE
SIGNAL
3 : 2 PULLDOWN
NOISE REDUCTION
HDMI RANGE
( )
OFF
[ RGB ]
AUTO
OFF
1024
×768
[ Digital ]
OFF
OFF
AUTO
43