Table of Contents
Advertisement
The four feet are not rest-
ing evenly on the floor.
The spin speed selected
was too low.
These do not indicate a
fault.
The machine has switched off the light ring to save en-
ergy. To switch the light ring back on again: press one of
the additional option buttons or turn the programme se-
lector.
The water supply pres-
sure is too low.
Washing powder used
with water softener tends
to become sticky.
The siphon is either in-
correctly positioned or
clogged.
§
Level the machine. See advice
on installation.
Select a higher spin speed
next time.
They occur at the end of a
pump sequence as a normal
part of the operation.
– Clean the filter in the water
inlet system.
– It may be useful to press the
Water plus button.
Pour washing powder into the
dispenser before adding any
water softener.
Clean the siphon, see
"Cleaning and care - Cleaning
the detergent drawer".
39
Advertisement
Table of Contents
