Transferring Entries To The Phone Book; Setting Automatic Answering; Adjusting The Intended Party's Listening Volume; Turn Multi-Control To Select The Function - Pioneer DEH-6150BT Operation Manual

Section
08 Using Bluetooth wireless technology
Turn to change the menu option. Press to se-
lect.
4 Turn MULTI-CONTROL to select the
function.
PH B TRANSFER (phone book transfer)—
A.ANSWER (automatic answer setting)—
END VOLUME (Adjust the intended party's lis-
tening volume)—RING TONE (ring tone se-
lect)—NUMBER DIAL (call by entering
number)—PRIVATE (private mode)
Notes
! To return to the playback display, press
BAND/ESC.
! If you do not operate functions other than
PH B TRANSFER, and NUMBER DIAL within
about 30 seconds, the display automatically
returns to the ordinary display.
! You can operate PRIVATE only while talking
on the phone.
! If Bluetooth telephone is not connected to this
unit, NUMBER DIAL cannot be operated.
Transferring entries to the
phone book
Phone books in your cellular phone can be
transferred to this unit by using your cellular
phone.
! 1 000 entries for each user (max. 5 devices)
can be stored in the phone book. Each in-
dependent entry can hold five phone num-
bers and genres.
1 Display the function menu.
Refer to Introduction to advanced operations
on the previous page.
2 Use MULTI-CONTROL to select
PH B TRANSFER.
3 Press MULTI-CONTROL to enter the
phone book transfer standby mode.
WAIT is displayed.
34
En
4 Use the cellular phone to perform
phone book transfer.
Perform phone book transfer using the cellu-
lar phone. For detailed instructions, refer to
the instruction manual that came with your
cellular phone.
When phone book transfer is completed,
DATA TRANSFER is displayed.

Setting automatic answering

1 Display the function menu.
Refer to Introduction to advanced operations
on the previous page.
2 Use MULTI-CONTROL to select
A.ANSWER.
3 Press MULTI-CONTROL to turn auto-
matic answering on.
# To turn automatic answering function off,
press MULTI-CONTROL again.
Adjusting the intended party's
listening volume
To maintain the good speech quality, this unit
can adjust the intended party's listening vo-
lume. If the volume is not enough for intended
party, adjust this function.
1 Display the function menu.
Refer to Introduction to advanced operations
on the previous page.
2 Use MULTI-CONTROL to select
END VOLUME.
3 Push MULTI-CONTROL left or right to
select the desired setting.
1—2—3—4—5
# This function can be performed even while
talking on the phone.
# Settings can be stored for each device.