HP ProDesk 405 G1 Specification page 33

QuickSpecs
Technical Specifications - Networking and Communications
Sub-channels
Network Architecture Models
Roaming
Output Power
Power Consumption
Power Management
Receiver Sensitivity
Note: Receiver sensitivity is
measured at a packet error rate
of 8% for 802.11b (CCK
modulation) and a packet error
rate of 10% for 802.11a/g
(OFDM modulation).
Antenna Connections
Form Factors
Weight
Dimensions
Operating Voltage
Temperature
Humidity
LED Activity
Note: Check latest software/driver release for updates on supported security features.
Multinational support with frequency bands and channels compliant to local regulations.
Ad-hoc (Peer to Peer)
Infrastructure (Access Point Required)
IEEE 802.11 compliant roaming between band Access Points
2.4G: +13.5dBm minimum
5G: +12dBm minimum
Note: Maximum output power may vary by country according to local regulations.
Transmit: 2.0 Watts
Receive: 1.6 Watts
Idle mode: 250 mW (WLAN associated) In Power Save Polling mode and on battery power.
Idle mode: 100 mW (WLAN unassociated)
Radio off: 100 mW (WLAN unassociated)
ACPI compliant power management
802.11 compliant power saving mode
802.11g:-90 dBm (6 Mbps), -89 dBm (9 Mbps), -87 dBm (12 Mbps), -85 dBm (18 Mbps), -82 dBm (24
Mbps), -79 dBm (36 Mbps), -76 dBm (48 Mbps), -74 dBm (54 Mbps)
802.11b:-95 dBm (1 Mbps), -93 dBm (2 Mbps), -91 dBm (5.5 Mbps), -88 dBm (11 Mbps)
802.11g:-90 dBm (6 Mbps), -89 dBm (9 Mbps), -87 dBm (12 Mbps), -85 dBm (18 Mbps), -82 dBm (24
Mbps), -79 dBm (36 Mbps), -76 dBm (48 Mbps), -74 dBm (54 Mbps)
2 U.FL type connectors (output impedance of 50 ± 2 ohms)
PCI-Express Half-MiniCard
0.0068 lb (3.1 g)
0.12 x 1.06 x 1.18 in (3.1 x 26.8 x 30.0 mm)
3.3V +/- 9%
Operating:
Non-operating:
Operating:
Non-operating:
LED Amber - Radio OFF; LED White - Radio ON
DA - 14697 North America — Version 4 — December 23, 2013
HP ProDesk 405 G1 Microtower Business PC
14° to 158° F (-10° to 70° C)
-40° to 176° F (-40° to 80° C)
10% to 90% (non-condensing)
5% to 90% (non-condensing)
Page 33