Honeywell S7999D SOLA User Manual page 23

Annunciation Configuration
Parameters
Table 25 displays annunciation configuration parameters.
Fig. 43. Annunciation configuration example.
Table 25. Annunciation Configuration Parameters.
Parameter
Annunciation enable Enabled
Disabled
Annunciator (1–8) 01 - Annunciator 1
location 02 - Annunciator 2
03 - Annunciator 3
04 - Annunciator 4
05 - Annunciator 5
06 - Annunciator 6
07 - Annunciator 7
08 - Annunciator 8
PII - Pre-Ignition ILK
LCI - Load Control Input
ILK - Interlock
Annunciator (1–8) Up to 3 characters
short name
Annunciator (1–8) Up to 20 characters
name
Comment
23
Safety Configuration Parameters
Table 26 through 29 display safety parameters.
NOTE: Login is required to change Safety Parameters
and the SOLA Control will go to a Lockout 2
"waiting for safety data verification" when a
change is made.
Fig. 44. Burner Control Interlocks control.
Table 26. Burner Control
Interlocks Configuration.
Parameter
PII enable Enabled
Disabled
LCI enable Enabled
Disabled
Interrupted air switch Enable during purge and ignition
(IAS) enable Disabled
Enable during purge
Interlock (ILK) start No ILK check
check enable ILK check
ILK/IAS open Recycle
response Lockout
ILK bounce detection Enabled
enable Disabled
Purge rate proving Fan Speed
High Fire Switch
None
Lightoff rate proving Fan Speed
Low Fire Switch
None
Comment
65-0315—02