Ultra Start 440 SERIES Owner's Manual page 3

Remote vehicle security system

Hide thumbs Also See for 440 SERIES:

To Enter Service Mode

Important- The system must be disarmed and the ignition must be off.

1. Press and release the lock and unlock buttons together then press

and hold the lock button for 5 seconds.

Toget her

2. The siren will chirp 5 times to confirm entering Service Mode.

3. Lock, Unlock and Trunk features are still operational at this time.

Note: The LEDs will be solid when the system is in Service Mode.

To Exit Service Mode

Important- The system must be disarmed and the ignition must be off.

1. Press and release the lock and unlock buttons together then press

and hold the lock button for 5 seconds.

2. The siren will chirp 2 times to confirm exiting Service Mode.

3.All alarm feature will be re-enabled at this time..

Note: The LEDs will return to normal operation.

Emergency Service Mode

Emergency Service Mode temporarily disables the alarm system.

This feature can be used if the remote is lost or damaged.

Ignition

Entering Service Mode

"ON"

1. Turn the ignition key to the "On" position.

2. Press and hold the program button for 5-15seconds.

3. The siren will chirp 5 times to confirm entering Service Mode

. Lock, Unlock and Trunk features are still operational at this time.

Press for

5 seconds

Note: The LEDs will be solid when the system is in Service Mode.

To Exit Service Mode

1. Turn the ignition key to the "On" position.

2. Press and hold the program button for 5-15seconds.

3. The siren will chirp 2 times to confirm exiting Service Mode.

4. All alarm feature will be re-enabled at this time..

Note: The LEDs will return to normal operation