Ultra Start 1280 series Installation Manual page 22

Advanced remote starters & vehicle security systems
Hide thumbs Also See for 1280 series:
Table of Contents

Advertisement

80 SERIES
INSTALL MANUAL
SETTING 4- RE-ARM OPTIONS
THE SIREN WILL CHIRP 4 TIMES WHEN SETTING 4 IS SELECTED
CHANGE SETTING 4 -
GOTO SETTING 5 - PRESS & RELEASE THE VALET SWITCH
1 CHIRP
2 CHIRP
3 CHIRP
SETTING 5- RUN TIME
THE SIREN WILL CHIRP 5 TIMES WHEN SETTING 5 IS SELECTED
CHANGE SETTING 5 -
GOTO SETTING 6 - PRESS & RELEASE THE VALET SWITCH
1 CHIRP
2 CHIRP
3 CHIRP
SETTING 6- REMOTE STARTING
THE SIREN WILL CHIRP 6 TIMES WHEN SETTING 6 IS SELECTED
CHANGE SETTING 6 -
GOTO SETTING 7 - PRESS & RELEASE THE VALET SWITCH
1 CHIRP
2 CHIRP
3 CHIRP
SETTING 7- LED FLASHES
THE SIREN WILL CHIRP 7 TIMES WHEN SETTING 7 IS SELECTED
CHANGE SETTING 7 -
GOTO SETTING 1 - PRESS & RELEASE THE VALET SWITCH
1 CHIRP
2 CHIRP
PRESS & HOLD THE VALET SWITCH UNTIL THE SIREN CHIRP(S)
SETS OPTION 1 - TYPE 2- The rearm output pulses only when the lock button is
pressed.
SETS OPTION 2 – AFTER START- The re-arm output will pulse after the remote
start starts the vehicle (DEFROST/ HEATED SEAT)
SETS OPTION 3 – REARM- Pulsed output when the doors are locked and after
remote start shutdown. (DEFAULT)
PRESS & HOLD THE VALET SWITCH UNTIL THE SIREN CHIRP(S)
SETS OPTION 1 – 4 MINUTES- The system will run for approximately 4 minutes
then shut off.
SETS OPTION 2 – 45 MINUTES- The system will run for approximately 45 minutes
then shut off.
SETS OPTION 3 – 15 MINUTES- The system will run for approximately 15
minutes then shut off. (DEFAULT)
PRESS & HOLD THE VALET SWITCH UNTIL THE SIREN CHIRP(S)
SETS OPTION 1 –TWO PRESSES- Press and release the start button two times to
activate the remote starter.
SETS OPTION 2 – ONE PRESS- Press and release the start button one time to
activate the remote starter.
SETS OPTION 3 – NEGATIVE PARK LIGHT- Negative output for park light flash
feature. (DEFAULT)
PRESS & HOLD THE VALET SWITCH UNTIL THE SIREN CHIRP(S)
SETS OPTION 1 –LEDS OFF- No LED flashes when the doors are locked/armed.
SETS OPTION 2 – LED FLASH- The LEDs flash when the doors are lock/ armed.
SYSTEM PROGRAMMING - Menu 1
PROGRAM MODE
PRESS
4 CHIRP
1 TIME
PRESS
5 CHIRP
1 TIME
PRESS
6 CHIRP
1 TIME
PRESS
7 CHIRP
1 TIME
PAGE 22
4X
5X
6X
7X

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents