Contents Safety information Care and cleaning Operation What to do if… First use Technical data Daily use Installation Helpful hints and tips Environmental concerns Subject to change without notice Safety information In the interest of your safety and to ensure before you discard the old appliance.
Page 3
Warning! Any electrical component Installation (power cord, plug, compressor) must be Important! For electrical connection replaced by a certified service agent or carefully follow the instructions given in qualified service personnel. specific paragraphs. 1. Power cord must not be lengthened. •...
Operation A medium setting is generally the most Switching on suitable. Insert the plug into the wall socket. Turn the Temperature regulator clockwise to However, the exact setting should be chosen a medium setting. keeping in mind that the temperature inside the appliance depends on: Switching off •...
For more thorough cleaning, the top and bot- tom door shelves can be easily removed and refitted in position Helpful hints and tips Normal Operating Sounds • do not store warm food or evaporating liq- uids in the refrigerator • You may hear a faint gurgling and a bub- •...
Page 6
• regularly check the door seals and wipe clean to ensure they are clean and free from debris • rinse and dry thoroughly. Important! Do not pull, move or damage any pipes and/or cables inside the cabinet. Never use detergents, abrasive powders, highly perfumed cleaning products or wax polishes to clean the interior as this will dam- age the surface and leave a strong odour.
3. defrost and clean the appliance and all Important! If the cabinet will be kept on, ask accessories somebody to check it once in a while to 4. leave the door/doors open to prevent un- prevent the food inside from spoiling in case pleasant smells.
Problem Possible cause Solution The product temperature is too Let the product temperature de- high. crease to room temperature before storage. Many products are stored at the Store less products at the same same time. time. There is no cold air circulation in Make sure that there is cold air cir- the appliance.
The technical information are situated in the rating plate on the internal left side of the ap- pliance and in the energy label. Installation Read the "Safety Information" carefully Electrical connection for your safety and correct operation of Before plugging in, ensure that the voltage the appliance before installing the and frequency shown on the rating plate cor- appliance.
Need help?
Do you have a question about the IKU169-0 and is the answer not in the manual?
Questions and answers