Carrier 30HR Product Data page 8

Physical data — SI (cont)
30HR,HS SIZE
COOLER PART NO. 40HA401---
DIMENSIONS
OD (mm)
Length (mm)*
NET WATER VOLUME (L)†
REFRIGERANT CIRCUITS
MAXIMUM DESIGN WORKING
PRESSURE (kPa)
Refrigerant Side
Fluid (Shell) Side
FLUID CONN. (in.)
Inlet and Outlet
Drain
*Between tube sheets.
†Includes nozzles.
**Victaulic-type water connections.
CONDENSER PART NO. 09RP---
DIMENSIONS
OD (mm)
Length (mm)*
NET FLUID VOLUME (L)
FLUID CONN. — in. diameter†
Inlet IPS**
Outlet IPS**
FLUID PASSES
MAXIMUM DESIGN WORKING
PRESSURE (kPa)
LEGEND
IPS — Iron Pipe Size
OD — Outside Diameter
*Between tube sheets.
†On part no. 084 condensers, data is for 3-pass only. For 6-pass, inlet and outlet connections are 2
**Field welded (flange with weld stub provided for all connections).
††The 09RP084 has 2 inlet connections.
NOTES:
1. The 2 ⁄ -in. and 3-in. condenser connections are equipped with slip-on flanges bolted to the condensers and
1
2
designed for field welding of field-supplied 2
The 4-in. condenser connections are equipped with welding neck flanges bolted to the condensers and designed
for field welding of field-supplied 4-in. schedule 40 pipe.
2. Standard 30HR,HS160 unit is supplied with 3-pass condensers. To convert from 3 to 6 pass, proceed as follows:
a. Remove 4-in. outlet flanges.
b. Cover 4-in. (09RP084) 3-pass condenser fluid outlet with blind flanges (field supplied).
3. Water outlet and inlet connections are rated according to ANSI/ASME B 16.5 (American National Standards
Institute/American Society of Mechanical Engineers) latest revision.
8
COOLER
070,080,090 100,110,120
664
324
2057
82.1
2
1620
2068
4**
⁄ FPT
3 3
4
CONDENSER
033 043 054
273 324 324
1715 1956 2118
21.6 32.2 37.5
2 1 ⁄ 3 3
2
2 1 ⁄ 3 3
2
3 3 3
Refrigerant Side — 2654
Fluid Side — 1724
1 ⁄ -in. and 3-in. schedule 40 pipe.
2
140,160
684 704
406 406
2108 2743
152.9 198.3
2 2
1620 1620
2068 2068
5** 6**
⁄ MPT ⁄ MPT
3
4 4
070 084
324 356
2419 2108
43.1 51.9
3 2 1 ⁄ ††
2
3 4
3 3 or 6
1 ⁄ inches.
2