NETGEAR ProSAFE FS728TLP Hardware Installation Manual page 7

Fast ethernet poe smart switch
Hide thumbs Also See for ProSAFE FS728TLP:
Table of Contents

Advertisement

ProSAFE Fast Ethernet PoE Smart Switch FS728TLP
The switch provides full compatibility with IEEE standards:
-
IEEE 802.3i (10BASE-T)
-
IEEE 802.3u (100BASE-TX, 100BASE-FX)
-
IEEE 802.3x (full-duplex flow control)
-
IEEE 802.3z (1000BASE-X)
-
IEEE 802.3ab (1000BASE-T)
-
IEEE 802.3af (Power over Ethernet)
-
IEEE 802.3az (EEE)
Autosensing and autonegotiating capabilities for all ports.
Auto MDI/MIDX technology is supported on all ports.
Automatic address-learning function to build the packet-forwarding information table. The
table contains up to 8 K Media Access Control (MAC) addresses.
Full- and half-duplex functions for all 10/100/1000 Mbps ports.
Store-and-forward transmission to remove corrupt packets from the network.
Full-duplex IEEE 802.3x pause frame flow control.
Active flow control to minimize packet loss and frame drops.
Half-duplex back-pressure control.
Per-port LEDs and system LEDs.
Internal power supply.
Standard 1U high, rack-mountable 19-inch chassis.
Fan speed control.
Support for the Power over Ethernet (PoE). PoE is supported on ports 1 through 12 with a
total power budget of 100W PoE. For example, the switch can support 15.4W for 6 ports
or 8W for 12 ports. The switch uses data pairs (RJ-45 1, 2, 3, and 6 PIN) to deliver the
power.
Introduction and Hardware Description
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents