Speakers/Headphones Settings
1. Switch between Speakers or Headphones mode.
2. Speakers / Headphones Configuration
Select your current physical speakers or headphones configuration.
3. For headphones, select the gain for headphone out:
Normal Gain (32/300 ohm headphones)
l
High Gain (600 ohm headphones)
l
Note:
Setting to high gain may damage your headphones if their impedance does not match the
specified level of 600 ohms.
4. Option to set to high gain by default.
Select Always set to high gain when in headphones configuration. This check box is only
applicable when High Gain is being selected as shown in the figure below.
Using the Creative Software Suite 34