HP 6600 Series Quickspecs page 51

QuickSpecs
Accessory Product Details
HP BLc SFP+ 7m 10GbE
Copper Cable (487658-
B21)
HP 6600 Switch Power
Supply (J9269A)
Services
Connectivity
Physical characteristics
Environment
Electrical characteristics Notes
Notes
Services
Physical characteristics
Environment
Electrical characteristics Notes
Services
DA - 13267 Worldwide — Version 19 — November 22, 2013
Refer to the HP website at:
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Length
Weight
Operating temperature
Operating relative
humidity
Nonoperating/Storage
temperature
Nonoperating/Storage
relative humidity
Altitude
Electrical Properties
• Cable Characteristic Impedance: 100 ohms
• Crosstalk between pairs: 2% max
• Time delay: 1.31 nsec/ft
Physical Properties
• Cable Diameter: 0.180"
• Minimum Cable Bend Radius: 1.0"
Refer to the HP website at:
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Dimensions
Weight
Operating temperature
Operating relative
humidity
Non-operating/
Storage temperature
Non-operating/
Storage relative humidity
Altitude
Refer to the HP website at:
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
HP 6600 Switch Series
www.hp.com/networking/services
22.96 ft. (7 m)
1.01 lb. (0.46 kg) the cable with an SFP+
transceiver at each end of the cable
32°F to 158°F (0°C to 70°C)
5% to 95%, noncondensing
14°F to 185°F (-10°C to 85°C)
5% to 95%, noncondensing
up to 10,000 ft. (3 km)
0.04 watts maximum per transceiver end
www.hp.com/networking/services
9.37(d) x 3.39(w) x 1.5(h) in. (23.8 x 8.6 x 3.8 cm)
2.45 lb. (1.11 kg)
41ºF to 104ºF (5ºC to 40ºC)
15% to 80% @ 104ºF (40ºC), non-condensing
-40ºF to 158ºF (-40ºC to 70ºC)
15% to 90% @ 104ºF (40ºC), non-condensing
up to 10,000 ft. (3 km)
Notes: Power draw and heat dissipation are
dependent on the number of power supplies
installed.
www.hp.com/networking/services
for details on
for details on
for details on
Page 51