Panels; Before You Begin - GE 200D9366P020 Owner's Manual And Installation Instructions

Bottom freezer refrigerators models 21 and 25
Table of Contents

Advertisement

Available languages

Available languages

Trim kits and decorator panels.
For panel required models
Read these instructions completely and carefully.

Before You Begin

Some models are equipped with trim kits that allow you to install door panels. You can order
pre-cut black or white decorator panels from GE Parts and Accessories, 800.626.2002, or you
can add wood panels to match your kitchen cabinets.
Panels less than 1/4 (6 mm) thick
When installing wood panels less than 1/4 (6 mm) thick, you need to create a filler panel, such as 1/8
cardboard, that will fit between the face of the door and the wood panel. If you are installing the pre-cut
decorator panels, pre-cut filler panels are included in the kit. The combined thickness of the decorator or
wood panel and the filler panel should be 11/32 (8.7 mm) with the panel itself being no larger than 1/4 (6
mm).
The handle and the top and bottom trim stand in front of the surface of the door, which requires that the filler
be smaller in length and width than the panel. Use the guidelines below and tape the filler onto the back of the
panel.
Left Fresh Food Door
Right Fresh Food Door
Freezer Door
15

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

49-60612Pfic1nfzbvPfic1nfzwvProfile pfic1nfz

Table of Contents